Home/Our Home
Build it right
from the start.
Connect with our architects and engineers before the first wall goes up. The decisions made on day one are the ones that cost the most to undo.
Great things start with good seeds.
-
Construction
-
Electrical
-
Aircon
-
Fit-out
What we do
Six trades under one contract. Pick whichever is closest to your project.
Construction & new builds
Commercial buildings, new structures, and the trades that go inside them.
See what’s includedElectrical works
Wiring, panels, lighting and power distribution. Guide rate ₱2,000/sqm.
See what’s includedAir-conditioning
Supply, install, service and repair. Units can be ordered through this site.
See what’s included
Renovation & fit-out
Turning an existing space into the one you actually need.
See what’s included
Repair & maintenance
Servicing, repairs and planned maintenance — including on systems we did not install.
See what’s included
Design & planning
Space planning, technical drawings and coordination before anything is built.
See the workConstruction and new builds
Commercial buildings, new structures, and the trades that go inside them.
General and commercial construction
Ground-up builds, extensions, and structural works.
Architectural design and planning
Drawings, space planning, and coordination before anyone breaks ground.
Multi-floor commercial projects
Office, retail, and mixed-use, with the trade packages bundled.
Site supervision and manpower
Our own people on site, not subcontracted at the last minute.
Electrical works
Wiring, panels, lighting and power distribution — designed, installed and tested.
Electrical installation and distribution
Panels, wiring, lighting and power distribution for residential, commercial and industrial premises.
Panel boards and metering
Panelboard supply and replacement, metering banks, service connections and terminations.
Lighting and power layouts
Outlets, lighting points and circuit design set out with the room, not after it.
Upgrades, rewiring and fault-finding
Capacity upgrades, rewiring of older installations, and tracing faults on systems we did not install.
Air-conditioning
Supply, installation, servicing and repair — window, split, cassette, floor-mounted and ducted.
Supply and installation
Units supplied and fitted, or installed if you already have them. Piping, drainage and power included.
Replacement and relocation
Swapping out old units, moving units between rooms, and making good afterwards.
Cleaning and preventive maintenance
Scheduled servicing and cleaning to keep units running and warranties intact.
Repair and troubleshooting
Not cooling, leaking, tripping — diagnosed and repaired, including units we did not install.
Renovation and fit-out
Turning an existing space into the one you actually need.
Office and commercial fit-out
Partitions, ceilings, flooring, and the services behind them.
Interior improvement and refurbishment
Updating a space without rebuilding it.
Built-in joinery and cabinetry
Storage and fitted furniture made to the room, not bought to fit it.
Design and finishes coordination
Lighting, materials, and layout specified as one scheme.
Keeping it working afterwards
Servicing, repairs, and planned maintenance — including on systems we did not install.
Electrical troubleshooting and repair
Fault-finding, remedial work, and panel replacement.
Aircon servicing and preventive maintenance
Cleaning, scheduled servicing, and repair across multiple units.
Building services maintenance
Planned and corrective maintenance for facilities in use.
Inspection and condition reporting
Finding out what is actually wrong before quoting a fix.
Most projects need more than one trade.
A fit-out needs a drawing, then power, then cooling, then the finishing. Every handover between contractors is where a schedule slips and nobody owns the problem.
We cover the whole line, or any part of it. One contract, one point of accountability.
Five steps, in order.
Tell us what you need
In plain terms. You do not need drawings or technical language to start.
We look at it properly
The right engineer or architect reviews it — not a salesperson.
We come back with options
What is involved, what it costs, and the honest trade-offs.
We do the work
Our own supervision on site, one contact point throughout.
We stay reachable
Maintenance, and a route back to the team that did the job.
Serving Metro Manila and nearby provinces.
With remote project discussions available where that suits you better.
Capability index.
The eight capability lines behind the four categories above, each with a defined scope. Useful if you are preparing a tender, a bill of quantities, or a technical enquiry. Select a line to see what it covers.
Electrical Engineering & Electrical Works
Design, installation, power distribution, and maintenance for commercial and industrial systems.
- Electrical system design and planning
- Electrical installation
- Power distribution systems
- Panel boards and electrical panels
- Wiring and cabling
- Lighting systems
- Commercial and industrial electrical works
- Electrical capacity upgrades
Mechanical Engineering Services
Mechanical design support, installation, and servicing of plant and building systems.
- Mechanical design support
- Equipment installation and alignment
- Pipework and ducting support
- Electro-mechanical works
- Plant and facility mechanical services
- Mechanical fit-out works
- System alterations and relocation
- Preventive and corrective maintenance
HVAC & Air-Conditioning
Installation, replacement, servicing, and preventive maintenance of cooling systems.
- Air-conditioning installation
- HVAC system installation
- Commercial air-conditioning
- Industrial and mechanical cooling
- System upgrades and replacement
- Preventive maintenance programmes
- Repair and troubleshooting
- Cleaning and servicing
Architectural, Design & Planning
Architectural design, space planning, technical drawings, and multi-discipline coordination.
- Architectural design
- Space planning
- Technical drawings
- Renovation and fit-out planning
- Design coordination across disciplines
- Project planning and sequencing
- Buildability review
- Scope definition and documentation
Construction & Project Implementation
General construction, renovation, fit-out, and on-site project execution.
- General construction
- Commercial construction
- Renovation and refurbishment
- Fit-out works
- Interior improvement works
- Building improvements
- Repair and restoration
- Site coordination and supervision
Fabrication & Metal Works
Metal fabrication, tinsmithry, custom works, and on-site installation.
- Metal fabrication
- Tinsmithry and sheet metal works
- Custom fabrication
- Structural and support fabrication
- Brackets, frames and enclosures
- On-site installation of fabricated items
- Fitting and modification
- Repair and rework
Technical Installation & Project Services
Equipment installation, mobilisation, site works, and commissioning support.
- Equipment installation
- Technical installation works
- Project mobilisation
- Site works and preparation
- Testing and commissioning support
- Turnover documentation support
- Technical manpower deployment
- Progress reporting
Maintenance & After-Service Support
Preventive and corrective maintenance, inspection, and ongoing technical support.
- Preventive maintenance programmes
- Corrective maintenance
- Inspection and condition reporting
- Troubleshooting and fault diagnosis
- Repairs and part replacement
- System improvements
- Scheduled servicing
- Ongoing technical support
Not sure where to start?
Tell us what you want to build and we will work out the rest with you. You do not need drawings, a budget, or technical language.